Truckcraft Dump Bed Inserts

Where Can I Get a TruckCraft Dump Bed Insert Installed?

We’re glad you asked. If you’re ready to add a dump insert product to your truck that works as hard as you do, Levan Machine and Truck Equipment & Trucking Equipment can help. At our shop, we take pride in assisting our customers in finding the ideal equipment that helps them get the job done.

Unsure of what Truckcraft product is right for you? We can help you decide. Our only goal is to provide you with top-level service and a customized truck that meets each and every one of your work needs.

When you’re ready to outfit your truck with the best equipment available, you’ll be glad you went with Levan Machine and Truck Equipment. Contact us today to start enjoying the multiple benefits of a Truckcraft bed insert on your next job.

Are Truckcraft Bed Inserts Good?

The Truckcraft brand is regarded as one of the most groundbreaking names in dump insert manufacturing. Truckcraft was the first to create an all-aluminum pickup dump insert, the first to offer a three-year warranty, and the first to include a 150 amp resettable circuit breaker standard in every wiring harness.

On Truckcraft insert dumpers, there are no grease points, as they are designed to use no-lube nylon bearings at every pivot point. Even now, Truckcraft continues to innovate. Check out some of our best dump insert products and their features below.

TC-101 Magnum Steel Inserts

If you’re wondering what the standard for Truckcraft dump bed inserts is, look no further than the TC-101 Magnum. This insert offers a dump capacity of 6,200 pounds, and is backed by a three-year limited warranty. This product includes a MONARCH power unit, giving you incredible confidence throughout your workday.

Also included is this insert’s top-of-the line powder coat finish that results in a durable, long-lasting, insert that not only looks good, but also protects your investment for years to come.

The Magnum also uses a unique weight-saving aluminum-alloy subframe, offering all the tensile strength of steel at half the weight. Magnum is designed to be virtually maintenance-free, with five pivot points that provide premium lubed-for-life bushings to create a grease-free operation.

Just an occasional wash, a biannual hydraulic fluid check, and daily inspection for debris and damage is all the Magnum needs to stay as dependable as possible.

Additional features on the TC-101 Magnum include:

  • 2 models – fit standard 8′ bed, or short-bed pickups ( 6 1/2′)
  • 2.5 Cubic Yard capacity (5+ Yd. with sideboards)
  • 48.5″ x 99″ Cargo area
  • 12-volt MONARCH HYDRAULICS™ Electro-Hydraulic system
  • 47-degree dump angle
  • Two welded stake pockets on front bulkhead, 8 on sides with tie-down rail
  • Dumper weight- 6 1/2′- 558lbs, 8′- 632lbs
  • 2 to 4-hour installation

TC-121 Ultra Aluminum Dump Insert

If you’re looking for something a little different, check out the TC-121 Ultra Aluminum Dump Insert. This impressive product has been engineered from the ground up to provide users with years of maintenance-free service.

Its body and frame is constructed entirely of aluminum and stainless steel, ensuring durability and protection against rust and corrosion. Truckcraft’s innovative aluminum alloy extrusions welded to sheet aluminum makes this dump insert 300 to 350 pounds lighter than other comparable steel units. As a result, this unit hauls more payload without unnecessarily expensive operation and maintenance costs.

Key features on Truckcraft’s TC-121 Ultra Aluminum Dump Insert include:

  • Rigid Floor of Extruded Aluminum – Constructed of aluminum alloy plank extrusions that provide rigid reinforcement every 5″. This “tongue and groove” design, proven in roll-back car carriers, keeps the floor from deflecting under heavy loads and eliminates the “washboard effect” seen in light-duty sheet-bed models.
  • Aluminum Rails – The TC-121 design utilizes a polished and fluted aluminum alloy extrusion on the top box rail of the body sides, and the top and bottom of the tailgate. This provides maximum overall strength at a minimum weight while adding a cool accessory to your truck.
  • Low Floor Height – This safety feature adds greater volume and keeps the vehicle’s center of gravity low, reducing the height that heavy objects must be lifted while loading them into the bed.
  • All Aluminum Bed – At 48 1/8″ x 98″, this bed holds a full sheet of plywood with the tailgate closed. The side board installation kit used with your boards will increase the volumetric capacity from 2.5 to 5+ cubic yards.
  • Three-way Tailgate – The TC-121 tailgate has a paddle latch that can be opened and closed with just one hand. The gate can easily be removed for complete access. Control chains can be adjusted in any position for using the tailgate as a spreader.
  • 3 Stage Telescopic Lift and Cab Protector – The ULTRA hoist system utilizes a heavy duty, three stage, telescopic cylinder with chromed rod sections. The hoist has been custom designed by TruckCraft to lift 7,000 lbs. to a 47 degree dump angle in just 18 seconds. The aerodynamic cab protector also provides low wind resistance and great visibility. The cab protector and a full tarp system are options that can be easily added to the TC-121 at any time.
  • Power Unit and Standard Remote Dump Control – A compact, one-piece MONARCH® power unit is factory mounted under the tub in close proximity to the hoist cylinder. The remote control buttons can activate the motor/hydraulic pump from within from up to 12 feet away. One 12 volt battery cable (supplied) is the only electrical connection required.
  • 150-Amp Resettable In-Line Circuit Breaker – This feature safeguards power in, and allows you to manually switch off power under the truck’s hood in order to disable an unattended insert.
  • 3 Year Limited Warranty
  • 2 Hour Installation

TC-121S Ultra Aluminum Shorty

If you notice your truck dump bed insert has significant corrosion and deterioration, then it is time to make a replacement. Rust is typically a slow-spreading disease to metal, but water and salt exposure can quickly create a bigger rust problem. When you begin noticing significant damage, it’s important to upgrade to avoid the dangerous consequences of doing heavy-duty work with corroding equipment.

Most dump bed inserts made today are coated with galvanized steel or aluminum to prevent rusting. If your dump bed is older or unprotected, rust can begin as early as in the first year. Upgrading will be more cost-effective and lead to a longer lifespan of your dump bed insert.

  • An all-aluminum T-6 tempered alloy and .125″ formed sheet
  • All stainless hardware for custom look and lasting durability
  • 7,000 lbs. dump capacity, 1.8 cubic yards volume
  • A body that raises to a 55 degree dump angle in just 19 seconds
  • A 12 volt, self-contained, MONARCH™ electro-hydraulic unit
  • A 3 year limited factory warranty
  • A 150-amp resettable in-line circuit breaker

TC-150 Leaf Topper

The Truckcraft TC-150 Leaf Express is an excellent all-aluminum product that can be quickly added to your TC-121 Ultra dump insert. It provides a sturdy 10 cubic yard leaf box for easy fall clean-up.

Important stand-out features on the TC-150 Leaf Topper are as follows:

  • Kit fits any full-size (8′) TC-121 ULTRA aluminum pickup dump, and can fit other makes with minor modifications.
  • Kit ships flat on skid; Assembled wt-263 lbs;Shipping wt 295 lbs
  • Stainless steel corner tubes for rigid strength
  • Removable, swing-out tailgate has area for your vacuum snorkel (Hole not cut)
  • Kit includes pre-drilled panels, mesh tarp, bungees, stainless hardware- everything you need
  • Bolted assembly & installation requires around 4 hours
  • Made of .090 thick, grade 5052 formed aluminum
  • One year limited factory warranty

The pickup truck has been known as the premiere automotive tool for the everyday working citizen since its very first inception. Never before had it been easier to load, transport, and remove debris like soil, sand, gravel, and even wet heavy snow from the job site — until now. Introducing the Truckcraft dump bed insert, a new productivity enhancement tool that converts your pickup into a fully functional dump truck.

Truckcraft dump bed inserts allow you to use your truck to its full potential. These dump inserts enhance your workday by maximizing jobsite load capacity and saving you the time and heavy-labor it takes to dump manually.

Match My Truck to a Snowplow

Ask a Question

Get Early Bird Pricing

Schedule Service

  • Date Format: MM slash DD slash YYYY
  • :